Also Consider
$79.84 /Carton
$101.66 /Carton
$85.46 /Carton
Product Details
The MULE Modified Urethane Latex Epoxy delivers ultra-smooth finishes to both indoor and outdoor surfaces. Abrasion-resistant coating is perfect for high-traffic areas subject to routine cleaning and disinfecting. Low-odor, highly washable formula easily adheres to prepared and primed surfaces including metal, concrete, brick, cinderblock, wood and drywall. Use in commercial spaces, offices, schools, health care facilities and more.
| Product Type | Building/Construction Paints & Primers |
| Paint Sub-category | Epoxy |
| Intended Application Environment | Interior/Exterior |
| Finish/sheen | Gloss |
| Colors | Silver Gray |
| Color Family | Gray |
| Number Of Colors | 1 |
| Volume Capacity | 1 gal |
| Packaging Type | Bucket/Pail |
| Binder/vehicle Ingredients | Modified Urethane Latex Epoxy |
| Diluent/solvent Ingredients | Glycol Ether |
| Application Method | Brush |
| Application Temperature Range | 50 to 90 F |
| Applicable Surface Material | Cement/Concrete |
| Maximum Coverage Area | 155 to 330 sq ft |
| Cure/dry-time Range | 15 min Touch |
| Age Recommendation | Ages 16 and Up |
| Product Biodegradability Indicator | N |
| Product Compostability Indicator | N |
| Compliance Standards | USDA FSIS Regulatory Sanitation Performance Compliant |
| Pre-consumer Recycled Content Percent | 0% |
| Post-consumer Recycled Content Percent | 0% |
| Total Recycled Content Percent | 0% |
| Disclaimer Statement | For best results, apply within the recommended Application Temperature Range 50 to 90 F when the surface temperature is also at least 5 F 3 C above the dew point and the relative humidity is not greater than 85%. |
| Footnote 1 | Recommended Dry Film Thickness DFT Per Coat: 1.5 to 2.5 mil |
| Footnote 2 | Recommended Wet Film Thickness to Achieve DFT: 4 to 7 mil |


