Also Consider
$83.32 /Carton
$79.84 /Carton
$85.46 /Carton
Product Details
The MULE is an easy to use, abrasion-resistant commercial coating designed specifically for high traffic areas that are subject to routine cleaning and disinfection: schools, healthcare facilities, offices, hospitality environments and more. Verstile Modified Urethane Latex Epoxy MULE features excellent adhesion qualities, allowing it to be applied on a wide range of both primed and previously painted materials, indoor and out. Use it on walls, doors, moldings, railings and even floors. Low-odor, water-based formula. Paint Sub-Category: Epoxy Intended Application Environment: Interior/Exterior Finish/Sheen: Gloss Colors: Safety Yellow.
English
| Product Type | Building/Construction Paints & Primers |
| Paint Sub-category | Epoxy |
| Intended Application Environment | Interior/Exterior |
| Finish/sheen | Gloss |
| Colors | Safety Yellow |
| Color Family | Yellow |
| Number Of Colors | 1 |
| Volume Capacity | 1 gal |
| Packaging Type | Bucket/Pail |
| Binder/vehicle Ingredients | Modified Urethane Latex Epoxy |
| Diluent/solvent Ingredients | Glycol Ether |
| Application Method | Brush |
| Application Temperature Range | 50 to 90 F |
| Applicable Surface Material | Cement/Concrete |
| Maximum Coverage Area | 155 to 330 sq ft |
| Cure/dry-time Range | 15 min Touch |
| Age Recommendation | Ages 16 and Up |
| Product Biodegradability Indicator | N |
| Product Compostability Indicator | N |
| Compliance Standards | USDA FSIS Regulatory Sanitation Performance Compliant |
| Pre-consumer Recycled Content Percent | 0% |
| Post-consumer Recycled Content Percent | 0% |
| Total Recycled Content Percent | 0% |
| Disclaimer Statement | For best results, apply within the recommended Application Temperature Range 50 to 90 F when the surface temperature is also at least 5 F 3 C above the dew point and the relative humidity is not greater than 85%. |
| Footnote 1 | Recommended Dry Film Thickness DFT Per Coat: 1.5 to 2.5 mil |
| Footnote 2 | Recommended Wet Film Thickness to Achieve DFT: 4 to 7 mil |
| Assembly Code | N |
| Prop 65 Indicator | Y |
| Green Indicator | N |
| EPACPGCompliant Code | N |


